46 points in Russian what an assessment. Translation of exam scores in mathematics

Each graduate who wants to become a student of one of the universities of the Russian Federation in 2018 faces a difficult task - to successfully pass the exam, as well as to choose the right educational institution and faculty for submitting documents. The majority of 11th graders and their parents are faced with the final exam grading system for the first time and often find it difficult to find answers to the questions that arise. Therefore, we decided to shed light on important points.

In 2017-2018, the basic rules for passing the exam will not be significantly changed. This means that the 100-point system for grading final tests will still be relevant for graduates.

How is everything going?

In the course of checking the examination papers, for each correctly completed task, the graduate receives the so-called “primary points”, which, upon completion of the work check, are summed up and converted into a “test score”, which is indicated in the USE certificate.

Important! Since 2009, the scale for converting primary and test USE scores into traditional five-point grades for schools has not been officially used, because in 2017 and 2018 final exams are not included in the certificate.

Checking work is done in two ways:

• automatically (with the help of special programs and technical means);
• manually (the correctness of detailed answers is checked by two independent experts).

It is quite difficult to challenge the result of an automatic check. If the basic rules were not followed when filling out the answer table, the computer may not protect the result, and only the graduate himself, who did not follow a number of mandatory rules, will be to blame for this.

If controversial issues arise during the expert review, a third specialist is involved, whose opinion will be decisive.

When to expect results?

The following time limits apply by law:

• data processing (for compulsory subjects) at the RCSC should not last longer than 6 calendar days;
• for data processing (subjects of choice) RTsOI give 4 days;
• verification at the Federal Testing Center should take no more than 5 working days;
• approval of the results by the State Examination Commission - 1 more day;
• up to 3 days to send the results to the USE participants.

In practice, from the moment of passing the exam to receiving the official result, it can take from 8 to 14 days.

Converting USE scores to grade

Despite the fact that officially in 2018 the scale for converting points in USE subjects into a five-point grade is not used, many still want to interpret their result in a more familiar "school" system. To do this, you can use special tables or online calculators.

Table for converting OGE test scores into grades

The second method is a little easier and more convenient than searching for the desired values ​​in the cells of a huge table. Simply select a subject (mathematics, Russian, chemistry, physics, history, English, social studies ... and other subjects), enter the data and get the desired result in a matter of seconds.

We suggest trying how simple and convenient it is to use in practice the online calculators of the USE score and its conversion to a 5-point grade.

Transfer of points from primary to test

Converting USE scores to grades

Internet systems for applicants

The academic year 2017-2018 is over, the exam has been passed, the results are known, and even the interactive scale for transferring primary scores showed that the USE result is in a fairly good range ... But, is this enough to enter the desired university?

Assess the real chances of entry, based on test scores and the minimum passing threshold set by the university.

Important! The minimum passing score is formed by the university itself. It will directly depend on the scores of applicants who apply in 2018. The more popular the specialty, the higher the passing score will be.

Often, at the TOP faculties, even 100-point results are not enough for admission to the budget. Only winners of the Olympiads, who give significant additional points, have a chance to see their last name in the lists of applicants for such areas.

In 2018, the most popular services for selecting a university and monitoring the entrance score threshold for various specialties will be:

1. Ucheba.ru
2. Apply online
3. HSE calculator
4. Postyplenie.ru
5. Typical entrant

Finding these services is very easy. It is enough to enter their name into any search engine.

The number of participants in the USE in physics in 2018 (main day) was 150,650 people, including 99.1% of graduates of the current year. The number of participants in the exam is comparable to the previous year (155,281 people), but lower than the number in 2016 (167,472 people). In percentage terms, the number of participants in the USE in physics amounted to 23% of the total number of graduates, which is slightly lower than last year. A slight decrease in the number of students taking the USE in physics may be due to an increase in universities that accept informatics as an entrance test.

The largest number of USE participants in physics is noted in Moscow (10,668), the Moscow Region (6,546), St. Petersburg (5,652), the Republic of Bashkortostan (5,271) and the Krasnodar Territory (5,060).

The average USE score in physics in 2018 was 53.22, which is comparable to last year's score (53.16 test scores). The maximum test score was scored by 269 exam participants from 44 constituent entities of the Russian Federation, in the previous year there were 278 people with 100 points. The minimum USE score in physics in 2018, as in 2017, was 36 TB, but in primary scores it was 11 points, compared to 9 primary points in the previous year. The proportion of exam participants who did not pass the minimum score in 2018 was 5.9%, which is slightly higher than those who did not reach the minimum score in 2017 (3.79%).

Compared to the previous two years, the proportion of poorly trained participants slightly increased (21-40 tb). The share of high-scorers (61-100 TB) increased, reaching the maximum values ​​for three years. This allows us to talk about the strengthening of differentiation in the training of graduates and the growth in the quality of training of students studying the profile course of physics.

In 2018, the proportion of exam participants who scored 81-100 points was 5.61%, which is higher than in 2017 (4.94%). For the USE in physics, the range from 61 to 100 test scores is significant, which demonstrates the readiness of graduates to successfully continue their education in universities. This year, this group of graduates increased compared to the previous year and amounted to 24.22%.

More detailed analytical and methodological materials of the USE 2018 are available at the link.

Our website contains about 3000 tasks for preparing for the exam in physics in 2019. The general plan of the examination paper is presented below.

PLAN OF THE EXAMINATION WORK OF THE USE IN PHYSICS 2019

Designation of the level of difficulty of the task: B - basic, P - advanced, C - high.

Correspondence between the minimum primary scores and the minimum test scores of 2019. Order on amendments to Appendix No. 1 to the order of the Federal Service for Supervision in Education and Science.

THRESHOLD SCORE
By order of Rosobrnadzor, a minimum number of points is established, confirming the mastering of the main general educational programs of secondary (complete) general education by the participants in the exams in accordance with the requirements of the federal state educational standard of secondary (complete) general education. THRESHOLD FOR PHYSICS: 11 primary points (36 test points).

EXAM FORMS
You can download the forms in high quality from the link.

WHAT YOU CAN BRING WITH YOU TO THE EXAM

At the physics exam, the use of a ruler for plotting graphs, optical and electrical circuits is allowed; a non-programmable calculator that performs arithmetic calculations (addition, subtraction, multiplication, division, root extraction) and the calculation of trigonometric functions (sin, cos, tg, ctg, arcsin, arcos, arctg), and also does not perform the functions of a communication facility, database storage and not having access to data networks (including the Internet). .

The results of the unified state exam in our country for all graduates are evaluated on a special scale, the maximum value of which for each individual exam is one hundred points. These scores are test or final, but they are not assigned immediately after checking and evaluating the work. Initially, the results of each student's work are evaluated in primary points, the maximum number of which is from thirty-seven to eighty. To convert primary scores into test scores, a special procedure called scaling is provided. This procedure involves taking into account the statistical materials obtained as a result of the unified state exam during the current year, which directly affects the final number of test scores.

What are the primary scores for the unified state exam?

At the first check of the results of the unified state exam in any subject, the graduate's work is evaluated in primary points. Each answer in the exam has a certain coefficient, on which the number of points assigned for a correctly completed task depends. Direct addition of these scores allows you to get a certain number of primary points. Their maximum value for each subject, so there is no single highest number of primary points. In different disciplines, their maximum amount varies between 37-80 units, and the specific value can be found out when performing the test version of the unified state exam.

How are primary scores translated into test scores?

The primary scores obtained by a graduate as a result of passing the unified state exam in a particular discipline are converted into test scores using a special technique called scaling. Test scores differ significantly from primary scores, these values ​​should not be confused, since for a student the decisive factor is the number of test scores scored, which are taken into account when further entering educational institutions for a profession. For each subject, their maximum value is common, it is one hundred units. The scaling procedure involves taking into account the statistical data of the exam and converting primary scores into test scores using special rules.

After checking the USE assignments in mathematics, a primary score is set for their implementation:

• For the basic level in mathematics - from 0 to 20;
• For the profile level in mathematics - from 0 to 30.

Each task is evaluated by a certain number of points: the more difficult the task, the more points you can get for it. For the correct performance of each task in the exam in mathematics at the basic level, 1 point is given. For the correct completion of tasks in the USE in mathematics at the profile level, from 1 to 4 points are given, depending on the complexity of the task.

After that, the primary score is converted into a test score, which is indicated in the USE certificate. It is this score that is used for admission to higher educational institutions. Translation of USE scores carried out using a special scoring scale. The USE score in basic mathematics is not required for admission, so it is not converted into a test score and is not indicated in the USE certificate.

Also, by the score for the exam, you can determine the approximate grade on a five-point scale that a student would receive for completing tasks on the exam.

Below is USE score conversion scale in mathematics for basic and profile levels: primary scores, test scores and a rough estimate.

USE score conversion scale: mathematics basic level

USE score conversion scale: mathematics profile level

The minimum test score for admission to higher education is 27.